Kartshop.com
Kartshop.com

Cookie Policy for kartshop.com

This is the Cookie Policy for kartshop.com, accessible from https://kartshop.com/

What Are Cookies

As is common practice with almost all professional websites this site uses cookies, which are tiny files that are downloaded to your computer, to improve your experience. This page describes what information they gather, how we use it and why we sometimes need to store these cookies. We will also share how you can prevent these cookies from being stored however this may downgrade or 'break' certain elements of the sites functionality.

Click HERE to read the full cookie policy for Kartshop.com
 

Worldwide shipping Same day shipment No extra fees with creditcard payment High level service +3500 kart parts available
Your purchase00,00 EUR

0

Miscellaneous tools

  
   

Carburettor tester

Carburettor tester
The carburetor tester can be used to measure when the carburetor opens and closes for the fuel. By adjusting the open and closing pressure of the carburetor you can adjust the area where the engine is performing. 

Please ask your engine dealer about the settings of the carburetor for the best engine performance. 
 
45,33EUR

Carburettor tool

Carburettor tool
This tool fits the bottom screw on the float house and the key can contain both needles and jets so it's easy and fast to change carburetor settings. The tool is well used for Rotax Max. 
 
39,36EUR

Chain cutter, Original RK

Chain cutter, Original RK
The chain cutter tool makes it easy, fast and precise to split a chain. 

Fits shifter kart chains and other from 415 to 630.


 
154,67EUR

Chain link measure tool, steel

Chain link measure tool, steel
The link measure tool can tell the number of links in a chain n 219 chains. 
Top tool for measuring the number of links on chains.
219 chains is used in all classes that are non-shifter/no gear.

​​​​​​​Stone part
24,43EUR

Engine sprocket storage, 11-14T

Engine sprocket storage, 11-14T
The storage is a great little tool for when you have to change the engine sprocket. The tool can be tightened in a workholder so you can loosen the nut on the clutch drum. 
 
24,43EUR

Float height measurement tool, sort

Float height measurement tool, sort
This tool is used to measure the height of the float on float house carburetors in Rotax Max, Rok and KZ.
 
18,03EUR

Fuel cooler, blue

Fuel cooler, blue
Fuel cooler in blue. The fuel cooler is mounted as a link in the fuel pipe connection and cools the fuel.
10,67EUR

Fuel cooler, red

Fuel cooler, red
Fuel cooler in red. The fuel cooler is mounted as a link in the fuel pipe connection and cools the fuel.
10,67EUR

Hand pump for fuel

Hand pump for fuel
With this hand pump/fuel pump, you can fuel the kart easy and fast directly from the fuel barrel without wasting anything.  
5,23EUR

Jet storage, space for 24 jet, black with magnets

Jet storage, space for 24 jet, black with magnets
Denne holder kan indeholde 18 stk. 6 mm hoveddyser og 6 stk. 5 mm tomgangsdyser. Holderen er særlig velegnet til Rotax, KZ gearkart og Vortex Rok.

This jet storage can hold up to 18 main jets in the 6 mm size and 6 idle jets in 5 mm. The storage is suitable for Rotax Max, KZ shifter karts and Vortex Rok. 
31,89EUR

Mandrel for axle 30 mm

Mandrel for axle 30 mm
A mandrel for getting the rear axle out easier out of the bearings. 
For Ø30 rear axle. 
30,83EUR

Mandrel for axle, 40 mm

Mandrel for axle, 40 mm
A mandrel for getting the rear axle out easier out of the bearings. 
For Ø40 rear axle. 
 
30,83EUR

Mandrel for axle, 50 mm

Mandrel for axle, 50 mm
A mandrel for getting the rear axle out easier out of the bearings. 
For Ø50 rear axle. 
 
 
30,83EUR

Needle change tool. VHSH30

Needle change tool. VHSH30
The tool keeps the spring in place so it's faster and easier to change the needle on Dellorto Carburetor. Fits VHSH 30 mm that is used in KZ and Vortex Rok. 
15,89EUR

Piston stopper, black

Piston stopper, black
The tool is made to stop the engine sprocket and clutch drum from spinning when you need to change it. 
 
10,56EUR

Piston stopper, blue

Piston stopper, blue
The tool is made to stop the engine sprocket and clutch drum from spinning when you need to change it. 
 
10,56EUR

Power valve spring tool

Power valve spring tool
This brilliant tool makes it easy and quick to change and mount the big spring on the green bellow in the power valve. 
Can be used for Rotax Max, OK and KF.
 
42,67EUR

Seat assembly kit

Seat assembly kit
A great tool for mounting the seat. 
The kit contains a mount for the bottom of the seat and a support for the rear axle to the seat. 
 
32,00EUR

Seat assembly tool, Professional, Stone

Seat assembly tool, Professional, Stone
Professional seat assembly tool.
This tool is full of opportunities this seat assembly tool from Stone is one of the best tools for assembly on the market. Used by top teams and a tool in top class and quality.

Stone part
 
180,80EUR

Spring mounting tool

Spring mounting tool
The tool make it easy to mount and dismount the springs you can find on a kart. 
 
8,43EUR

Steering wheel lock for steering alignment

Steering wheel lock for steering alignment
Simple steering wheel lock for the optimal steering alignment. Used by squeezing the lock between the seat and steering wheel and then the steering wheel won't move when working on the alignment.  
32,96EUR

Stub axle spacer tool, 25 mm stub axle

Stub axle spacer tool, 25 mm stub axle
This tool is used for mounting the front wheel spacers on 25 mm stub axles. 
 
24,00EUR

Tire tool for changing tires

Tire tool for changing tires
This tire changing tool can both mount and dismount tires without any problems. The tire tool can be brought everywhere and tire change can be done in a few minutes.
106,13EUR

Tool for blocking Rotax clutch

Tool for blocking Rotax clutch
The tool stops the flywheel so you can dismount the clutch easier. 
 
45,33EUR

Tool for cutting water pipe, black

Tool for cutting water pipe, black
This grip can squeeze the water pipe so the water can't run out when you change the engine. The grip will also make it easier to pull the pipe away from the stub on the engine.
 
6,67EUR

Wheel balancing tool

Wheel balancing tool
Balance your tires correctly with this tool. The wheel and tire balance tool is very precise for balancing wheels and tires on the track with this simple tool. 
159,47EUR

Wheel Valve tool

Wheel Valve tool
Wheel valve tool used to screw the mechanical part out of the wheel valve.
2,67EUR

Tire disassembling tool, EVO

Tire disassembling tool, EVO
The tire disassembling tool is used to pressure the tires of the wheel when it has to be changed. It is very stable and has plastic edges which protects the wheel.

The disassembling tool can be separated to take up less. space.
 
72,00EUR

Tyre Mounting Paste, Provac, 1 kg

Tyre Mounting Paste, Provac, 1 kg
  • Tire soap can be used to lube tires and wheels.
  • It makes it easier to mount the tires on the wheel.
  • You will avoid to expand the tire case when it is filled up with air because you don't have to fill as much air in the tire before it pops. 
  • Original Provac.
  •  
15,89EUR

Carburettor protections VHSH 30

Carburettor protections VHSH 30
Protection caps for Dellorto VHSH 30 Carburetor.
21,23EUR

Chain breaker, 428, KZ

Chain breaker, 428, KZ
Is the chain too long? This breaker can make a 428 chain for KZ smaller or longer by breaking it up o you can remove or even add som links to the chain. 
22,40EUR

Chain wear measure tool , 428

Chain wear measure tool , 428
The chain is one of the most essential tools on a racing kart. A worn chain will damage engine and rear sprockets and the power of the engine will be rapidly decrease. 
 
22,29EUR

Chain wear measure tool, 215

Chain wear measure tool, 215
The chain is one of the most essential tools on a racing kart. A worn chain will damage engine and rear sprockets and the power of the engine will be rapidly decrease. 
22,29EUR

Chain wear measure tool, 219

Chain wear measure tool, 219
The chain will always after some time begin to stretch because it is the chain that transfers the power of the engine through the sprocket and then to the rear axle of the kart and therefore it is always heavily loaded. That is were this tool is very useful. The chain can be measured easily and you can get a quick view if the chain is good or bad. A too stretched chain will be too slow and worst-case scenario is that it will break while driving.
This tool is for 219 chains.  
22,29EUR

Circlip tool, 125 cc

Circlip tool, 125 cc
This tool is for attaching the circlip to the piston. 
The tool is easy to use and you will avoid damage on the piston. 
41,39EUR

Clips for revolution cable Unipro / Mychron

Clips for revolution cable Unipro / Mychron
Clips for rev counter cable for Unipro and Mychron. The clips is mountes on the ignition wire and the rev counter cable is mounted in it. 
4,16EUR

Control and chassis straightening bench, OTK

Control and chassis straightening bench, OTK
The bench has been designed to be completely disassembled, it is easy to transport and extremely flexible to your needs. Made by means of the most modern machinery, completely in steel, it ensures the highest level of precision during each check and restore of the geometry of the frame.

To be able to use the control bench at 100%, it is necessary to use the convergence control laser, normally used by all the racing teams. 
3.186,67EUR

Engine sprocket storage, 9-11 tooth

Engine sprocket storage, 9-11 tooth
Storage for engine sprockets 9 - 10 - 11 teeth engine sprocket. 
For 219 engine sprockets. 
11,95EUR

Insert for measuring engine top volume

Insert for measuring engine top volume
An engine head insert used for measuring the top volume of the kart engine. 
5,12EUR

Jet storage

Jet storage
The smart key for Dellorto VHSB - VHSH carburetors which are used in Rotax Max and KZ shifter karts. Now you have the possibility to loosen the float bowl screw and have a tool for storing the jets without using the screwdriver and other tools. 
A perfect tool with storage for jets and will at the same time it won't damage the jet when changing it.
12,24EUR

Main jet holder plate, Magnetic, Black

Main jet holder plate, Magnetic, Black

This jet storage can hold up to 18 main jets in the 6 mm size and 6 idle jets in 5 mm.
The storage is suitable for Rotax Max, KZ shifter karts and Vortex Rok.

31,89EUR

Protection plastic cylinder for Valve Dell'Orto PHBG 18

Protection plastic cylinder for Valve Dell'Orto PHBG 18
A necessary part for protecting the carburetor valve and needle on Cadett/J60/60 mini when the engine is removed from the kart.The housing features support for the needle so it will always be in perfect security from damage. 

Made from plastic.
8,00EUR

Protection plastic cylinder for Valve Dell'Orto VHSB 34mm

Protection plastic cylinder for Valve Dell'Orto VHSB 34mm
 A necessary part for protecting the carburetor valve and needle in Rotax Max classes when the engine is removed from the kart. 

Made from plastic.
16,00EUR

Protection plastic cylinder for Valve Dell'Orto VHSH 30mm

Protection plastic cylinder for Valve Dell'Orto VHSH 30mm
A necessary part for protecting the carburetor valve and needle in KZ classes when the engine is removed from the kart. 

Made from plastic.
 
 
12,27EUR

Puller for PVL Rotor

Puller for PVL Rotor
A puller for PVL Rotor.
9,07EUR

Puller for X30 Clutch

Puller for X30 Clutch
Puller for X30 clutches.
13,33EUR

Safety belt for tire popping

Safety belt for tire popping
Safety belt for mounting the tires on the wheel. 
The belt is fitted around the tire and adjusted to the right size. 
Then the air is pumped into the tire making it pop without destroying the tire case of the tire.

 
114,13EUR

Seat assembly kit, OTK

Seat assembly kit, OTK
Seat assembly tool from OTK. 
The kit contains tools for adjusting the bottom of the seat and the back.
A perfect kit for mounting the seat correct and perfect.

Original OTK part
 
92,00EUR

Spark plug tool 16 mm

Spark plug tool 16 mm
Spark plug tool size 16 mm, which is used on the small spark plugs which are used with NKG R7282 spark plugs amongst other.
 
7,36EUR

Spark plug tool 21 mm

Spark plug tool 21 mm
Spark plug tool size 21 mm which is the standard size for spark plugs and can therefore be used with all standard sized spark plugs. 
 
7,36EUR

Tire pressure gauge, 0 - 2,5 bar

Tire pressure gauge, 0 - 2,5 bar
Tire pressure gauge that goes up to 2,5 bar.
Display diameter on 100 mm that is equipped with a rubber pipe on 470 mm plus ventilation valve.
Chrome steel handle and shock proof cover. 
 
79,89EUR

Tire tools changeable plastic

Tire tools changeable plastic
Interchangeable plastic kit for tire tool. 
19,09EUR

Tool for changing needle, VHSB34

Tool for changing needle, VHSB34
The tool keeps the spring in place so it is easier and faster to change needle on the Dellorto carburetor. 
Fits VHSB 34 which is used in all Rotax Max classes.
 
10,56EUR

Tool for changing needle, VHSH30

Tool for changing needle, VHSH30
The tool keeps the spring in place so it is easier and faster to change needle on the Dellorto carburetor. 
Fits VHSH 30 which is used in KZ classes.
10,56EUR

Tool for measuring height of float assembly, Dellorto PHBG, MA Engines

Tool for measuring height of float assembly, Dellorto PHBG, MA Engines
Specially designed carburetor tool for measuring the float height on Dellorto PHBG carburetors.
The kit contains 8 tools that goes from 15,00 to 16,40.
 
55,47EUR

Tool for wheel valve

Tool for wheel valve
Tool for quick and correct mounting of valves in the wheels. 
 
6,40EUR

Work table, with tire storage, Stone

Work table, with tire storage, Stone
The popular work table from Stone with tire storage. Size 150 x 60 cm.
The table is easily folded and takes minimal space when transporting. 
Produced in aluminium.

Stone part
 
245,33EUR

Disassembling tyres system OTK

Disassembling tyres system OTK
Tire disassembly system from OTK. In one motion you can disassembly both sides of the tire. 
Very solid tool which is developed for an easy and fast tire disassembling. 

Original OTK part
 
210,00EUR

Tires support, OTK

Tires support, OTK
Keep track on all of your tires with this nice tire support from OTK. The model is newer than the picture. The bottom is a round piece . A quality model from OTK. The height can easily be adjusted. 

Original OTK part
 
48,50EUR
  
   

The kartstore has over 3300 kart parts and wheels parts in stock.

Official OTK dealer. Kartshop provide the best kartstore. Great prices, quality and wheels parts

Kartshop, kartstore, kart store, kart parts, OTK. Engines and spare parts and wheels parts in stock

Tillet, Jecko, exprit, kart tyres, New line, M7, engines, spare parts and wheels parts in stock.