Fast delivery in all of EU and UK Free EU shipping for all orders over 200 Euro Same day shipment No extra fees with creditcard payment
Your purchases00,00 EUR

0

Axle supports and bearings

AKSEL LEJE Ø25 X 50MM AKSEL LEJE Ø30 X 60MM AKSEL LEJE Ø30 X 60MM AKSEL LEJE Ø50 X 80MM PINOLSKRUE FOR LEJE, M8 X 1MM LEJESKÅL TIL Ø30 LEJE, ROOKIE - MINI - NORDIX LEJESKÅL NEOS LEJESKÅL STØBT ALU. KONSENTRISK Ø 40-50 MM 3 POSITION CENTER HØJRE LEJESKÅL STØBT ALU. KONSENTRISK Ø 40-50 MM 3 POSITION VENSTRE LEJESKÅL STØBT ALU. KONSENTRISK Ø 40-50 MM LEJESKÅL STØBT ALU. ULIGE 5MM Ø40-50 MM, 3 POSITION CENTER/HØJRE LEJESKÅL STØBT ALU. ULIGE 5 MM Ø 40-50 MM 3 POSITION VENSTRE LEJESKÅL STØBT ALU. ULIGE 10MM Ø 40-50 MM, 3 POSITION CENTER/HØJRE LEJESKÅL STØBT ALU. ULIGE 10MM Ø 40-50MM, 3 POSITION VENSTRE CYLINDERBOLT, M8 X 20 MM SKIVE Ø8 X 17MM SKIVE Ø8 X 17MM SEKSKANTET BOLT, M8 X 25MM SKIVE Ø8 X 17 X 3MM BESLAG FOR BREMSESKIVE Ø180 MM (RYKKER KALIBER 5 MM) BESLAG FOR BREMSESKIVE Ø180 (RYKKER KALIBER 10 MM)
  
   

Axles support Ø30 mm for Rookie - Mini - Nordix

Axles support Ø30 mm for Rookie - Mini - Nordix
Axle support for Ø30 bearing.
The axle support can be used for Rookie - Nordix - Mini EXP

Original OTK part
 
62,50 40,00EUR

Axles bearing D25x50mm

Axles bearing D25x50mm
OTK axles bearing in Ø25 x 50 mm. 
The bearing supports 2 lock screws (M6 x 0,75mm), not included.

Original OTK part
18,75EUR

Axles bearing Ø30x60mm

Axles bearing Ø30x60mm
Axle bearing from OTK Ø30 mm, which is used in Cadett/60 mini/J60 and Rotax Micro frames from OTK. Delivered without lock screws and there is used 2 lock screws size M6 x 0,75 mm.
23,75EUR

Axles bearing Ø40x80mm

Axles bearing Ø40x80mm
OTK rear axle bearing Ø40 x 80 mm.
The bearing supports 3 lock screws (M8 x 1mm), which is not included.
28,75EUR

Axles bearing Ø50x80mm

Axles bearing Ø50x80mm
OTK rear axle bearing Ø50 x 80 mm.
The bearing supports 3 lock screws (M8 x 1mm), which is not included.
35,00EUR

Lock, M6 x 6mm, elevation 0,75mm

Lock, M6 x 6mm, elevation 0,75mm
The lock screw is used to tighten the rear axle to the bearings, so the axle won't move when driving.
1,06EUR

Lock, flat tip, M6 x 8mm

Lock, flat tip, M6 x 8mm
Lock screw M8 x 8 mm. It's a bit longer than a standard lock screw.
Used for brake pumps control rod and bearings. 

Original OTK part
0,11EUR

Axles locking bearing M8X1

Axles locking bearing M8X1
Lock screw for rear axle bearing M8 x 1 mm, which is used for Ø40 and Ø50 axles.
Original OTK part
0,25EUR

Washer D8 x 17 x 3mm

Washer D8 x 17 x 3mm
Washer in size:
Inner diameter: Ø8
Outer diameter: 17mm 
Width: 3mm

This is used amongst others, the axle support. 

Original OTK part
0,13EUR

Calipers connection for eccentric axle support 5 mm D180 mm (Moves caliper 5 mm)

Calipers connection for eccentric axle support  5 mm D180 mm (Moves caliper 5 mm)
Calipers connection for eccentric axle support  5 mm D180 mm (Moves caliper 5 mm)

Original OTK part
 
68,75EUR

Calipers connection for eccentric axle support 10 mm D180 (Moves caliper 10 mm)

Calipers connection for eccentric axle support 10 mm D180 (Moves caliper 10 mm)
Calipers connection for eccentric axle support 10 mm D180 (Moves caliper 10 mm)

Original OTK part
 
68,75EUR

Head Bolt, M8 x 25mm

Head Bolt, M8 x 25mm
Head bolt M8 x 25 mm. 
Used for finger screw on fuel tank, axle supports and mounting the exhaust etc on the exhaust support.

Original OTK part 
0,16EUR

Self locking nut, M8, low

Self locking nut, M8, low
Self locking nu M8 low

Original OTK part
 
0,09EUR

Washer Ø8 x 17mm

Washer Ø8 x 17mm
Washer Ø8 mm with outer diameter on 17 mm.

Original OTK part
 
0,05EUR