The fixing lever keeps the to half of the front bumper together but still gives the opportunity to mount the front spoiler without the support has to be loosened. 

Nassau panel / front spoiler from KG in black.
The model is CIK/02 and used for 100 cc classic karts etc.

Original KG
 

The support is only necessary if the rear protection doesn't have a support for numberplate. The number plate is mounted with 2 supports which is tightened together with 2 bolts.
 

Oil seal, D20x35-4,5 mm, ARS FPJ Teflon.

Reed petal for Vortex Rok and 100cc engine. 
Thickness: 0,22 mm. 
Characteristic: Soft.
Produced in Carbon. 
 

Plated cage, IKO, 14x18-17mm, Silver for100cc engines. 

Small end cage, IKO, 14x18-17mm, B4 that fits 100cc engine. 

The steering joinbal has an inner thread and fits steel steering tie-rods.
The joibal should be changed when it begins to show some slack which results in imprecise steering.

Original IKO

The steering joinbal has an inner thread and fits steel steering tie-rods.
The joibal should be changed when it begins to show some slack which results in imprecise steering.

Original IKO

Reed petal for Vortex Rok and 100cc engine. 
Thickness: 0,24 mm. 
Characteristic: Medium
Produced in Carbon. 

Reed petal for Vortex Rok and 100cc engine. 
Thickness: 0,26 mm. 
Characteristic: Hard
Produced in Carbon. 

Side pod from KG in black.
The model is CIK/02 and used for 100 cc classic karts etc.

Note that the price is per unit.
 

Bridgestone YPC for OKJ in 2020. This is the option tyre from Bridgestone. A great compound for kart racing in the junior class.

A set of tyres is 2 rear tyres and 2 front tyres.

You find the homologation for YPC front tyres here
You find the homologation for YPC rear tyres here

Front spoiler from KG in black.
The model is CIK/02 used for 100 cc karts etc. 

Original KG
 

Bridgestone YPC for OKJ in 2020. This is the option tyre from Bridgestone. A great compound for kart racing in the junior class.
You find the homologation for YPC rear tire here

Holes wheelbase D.6,5mmm: 134mm
Centering Diameter: 116mm

For inox pipe 6/8mm with M10x1,00 ends

Big End Cage for conrod from IKO D18 x 24 x 15 mm

15 pins in 2B, 2,998mm

Big End Cage for conrod from IKO D18 x 24 x 15 mm

15 pins in B2, 2,996mm

Big End Cage for conrod from IKO D18 x 24 x 15 mm

15 pins in B4, 2,994mm

Conrod complete with bearing for 100 cc. 

Conrod complete with bearing for 100 cc. 

• Crankpin for Conrod

• Fits 100cc engines

• Outside Diameter: 18,000 mm

• Inside Diameter : 6 mm

• Lenght: 46 mm

• Crankpin for Conrod

• Fits 100cc engines

• Outside Diameter: 18,000 mm

• Solid

• Lenght: 46 mm

Elto exhaust for 100cc class.
All Elto parts from the original Elto factory. 

Aluminium conveyor fully machined with convex profile.
Mounting on 100cc engine with reed group short type.

• Silver Trust Washer for Conrod.

• Fits 100cc Engines

• Outside Diameter: 30 mm

• Inside Diameter: 18 mm

• Thickness: 1 mm

• High Quality Product.

with right and left threading

with right and left threading

For inox pipe 6/8mm with M10x1,00 ends