Kartshop.com
Kartshop.com

Cookie Policy for kartshop.com

This is the Cookie Policy for kartshop.com, accessible from https://kartshop.com/

What Are Cookies

As is common practice with almost all professional websites this site uses cookies, which are tiny files that are downloaded to your computer, to improve your experience. This page describes what information they gather, how we use it and why we sometimes need to store these cookies. We will also share how you can prevent these cookies from being stored however this may downgrade or 'break' certain elements of the sites functionality.

Click HERE to read the full cookie policy for Kartshop.com 

Worldwide shipping Day to day delivery Everything in stock Excellent customer service +5500 kart parts available
Your purchase00,00 EUR

0

Brake pump BSM4

SKIVE Ø6,4 X 11 X 1,5MM SKIVE Ø6,4 X 11 X 1,5MM ALU. CYLINDER FOR BSM 4 HOVEDCYLINDER FJEDER FOR HOVEDCYLINDER BSM 4 HOLDER FOR HOVEDCYLINDER OG BREMSESTANG, BSM 4 HOVEDCYLINDER KOMPLET BSM 4 HOVEDCYLINDER LÅSERING FOR HOVEDCYLINDER BSM 4 PAKDÅSE FOR BSM 4 HOVEDCYLINDER PAKNING FOR BSM 4 HOVEDCYLINDER PIN FOR BSM 4 HOVEDCYLINDER LÅSESPLIT PIND LIGE CONNECTOR FOR BREMSESLANGE M10X1-1/8" LÅG FOR HOVEDCYLINDER RESERVOIR PAKNING FOR HOVEDCYLINDER TANK SKIVE FOR HOVEDCYLINDER TANK TANK FOR BREMSEPUMPE
  
   

Pegs locking split-pin

Pegs locking split-pin
Pegs locking split-pin which is used for securing. 
Used among other things, for the lengthening arms for the brake pump on OTK brake systems. 

Original OTK part
 
0,04EUR

Washer Ø6,4 x 11 x 1,5mm

Washer Ø6,4 x 11 x 1,5mm
Washer Ø6 mm with an outer diameter on 11 mm and a thickness on 1,5 mm. 

Original OTK part
 
0,03EUR

Brake pipes straight connector M10x1-1/8

Brake pipes straight connector M10x1-1/8
connector for brake pipe M10 x 1-1/8", which is used for BSD brake caliper, brake pump BSD, BSS, SA2 and brake pump for BSM. 

The connector is mounted on the brake pump and on the other end the brake pipe.

Original OTK part. 
 
2,90EUR

Brake pumps control rod, OTK, 200 mm

Brake pumps control rod, OTK, 200 mm
Brake pump control rod 200 mm. 
The control rod is mounted on the brake pedal to the brake pump.
Threaded in both ends where the push rod system M6 x 12 or M6 x 24 is mounted. 
Used for Rookie EV rudder pedals. 

Original OTK part
 
9,20EUR

Brake pumps control rod OTK, 240 mm

Brake pumps control rod OTK, 240 mm
 
Brake pump control rod 240 mm. 
The control rod is mounted on the brake pedal to the brake pump.
Threaded in both ends where the push rod system M6 x 12 or M6 x 24 is mounted. 
Used for Rookie EV and the standard is 290 mm rod. 

Original OTK part
 
 
9,20EUR

Brake pumps lining

Brake pumps lining
Gasket for BSM4 brake pump. 
The gasket has a lip which will make the brake pump dense of brake fluid and press the fluid to the rear of the brake caliper which will make the kart brake. 
The big lip goes into the brake pump first. 

Original OTK part.
 
2,95EUR

BSM 4 Brake pump

BSM 4 Brake pump
Complete BSM 4 brake pump. 
BSM 4 is used for the Rookie EV kart. 
Use OTK dit 5,1 brake fluid for this system. 

Original OTK part.
 
178,20EUR

BSM 4 brake pumps lever

BSM 4 brake pumps lever
BSM 4 brake pump lever. 
The lever will make the piston apply pressure to the brake pump when the brake is used. 

Original OTK part.
 
9,00EUR

BSM 4 brake pumps piston

BSM 4 brake pumps piston
Aluminium cylinder for BSM 4 brake pump. 
The cylinder will make sure that there will be pressure to the back of the brake caliper when the brake is pressed down and the kart brakes. 
Remember gaskets when changing. 

Original OTK part.
13,00EUR

BSM 4 pump spring

BSM 4 pump spring
Spring for brake pump BSM4, which is used to pull the piston back inside the brake pump. 

Original OTK part.
 
4,60EUR

BSM 4 Seeger

BSM 4 Seeger
Seeger for BSM 4 brake pump. 
The seeger will help to keep the piston in place and should be changed when renovating the brake pump. 

Original OTK part.
 
0,06EUR

Oil-seal

Oil-seal
Oil seal for BSM 4 brake pump. 
The oil seal is found in the end of the piston and it helps to keep the brake pump sealed with all the gaskets. 

Original OTK part.

 
3,50EUR

BSM 4 brake pumps pin

BSM 4 brake pumps pin
Pin for BSM 4 brake pump which holds the support for the brake pumps control. 
There is a hole in the pin which you can use a lock spilt in.

Original OTK part.
 
4,40EUR

Brake pump tanks cap

Brake pump tanks cap
Cap for brake pumps reservoir which is found on the OTK brake pump systems

Original OTK part
 
17,30EUR

Brake pump tanks lining

Brake pump tanks lining
Lining for the brake pump tank. 
The lining fits in the tank underneath the cap and has a washer inside which keeps the tank of brake fluid sealed. 

Original OTK part 
 
4,90EUR

Brake pump tanks washer

Brake pump tanks washer
Washer for brake pump tank. 
The washer is placed in the lining underneath the cap and will keep the tank sealed.

Original OTK part
 
0,86EUR

Brake pumps tank

Brake pumps tank
Tank for BSM4 brake pump which is on the top of the brake pump. 
In this tank the brake fluid is filled in and is used on may types of the brake pumps from OTK.

Original OTK part.
 
26,50EUR
  
   

The kartstore has over 3300 kart parts and wheels parts in stock.

Official OTK dealer. Kartshop provide the best kartstore. Great prices, quality and wheels parts

Kartshop, kartstore, kart store, kart parts, OTK. Engines and spare parts and wheels parts in stock

Tillet, Jecko, exprit, kart tyres, New line, M7, engines, spare parts and wheels parts in stock.