Kartshop.com Kartshop.com
Worldwide shipping Free EU shipping for all orders over 200 Euro Same day shipment No extra fees with creditcard payment
Your purchase00,00 EUR

0

Brake caliper, SA2

KOMPLET SA2/BS6 BAGBREMSEKALIBER BREMSEKLODS, SA2 - BS5 - BS6, 1 STK. BREMSEKLODS, SA2 - BS5 - BS6, 1 STK. BREMSEKLODSER, SA2-BS5-BS6 2 STKS PAKKE LÅSEBØSNING FOR BREMSEKLODSER BAG, BSD - SA2 - BS6 BOLT FOR BREMSEKLODSER BSD - SA2 - BS6 - MINI BAGBREMSEKALIBER SELVLÅSENDE MØTRIK, M5 PINOLSKRUE FLADT HOVED M4 X 4MM UNDERSÆNKET SKRUE M4 X 14MM BESLAG FOR BREMSESKIVE FRA Ø180 TIL Ø 206 MM MAGNET FOR BSD- SA2 - BS5 - BS6 KALIBERSTEMPEL BESLAG FOR BREMSESKIVE, Ø180 MM STEMPEL FOR SA2 - BSD BAGBREMSEKALIBER PAKNING FOR SA2 - BSD - BS6 BAGBREMSEKALIBER CLIPS FOR BSD- SA2- BS6 BAGBREMSEKALIBER UDLUFTNINGSSKRUE Ø7 X 1MM BESLAG FOR BREMSESKIVE Ø180 MM (RYKKER KALIBER 5 MM) BESLAG FOR BREMSESKIVE Ø180 (RYKKER KALIBER 10 MM) CYLINDERBOLT M8 X 25MM CYLINDERBOLT M8 X 25MM SEKSKANTET BOLT M8 X 40MM SEKSKANTET BOLT M8 X 55MM LUFTINDTAG FOR BREMSER, OTK MONTERINGSKIT FOR LUFTINDTAG CYLINDERBOLT M8 X 35MM CYLINDERBOLT M8 X 30MM CYLINDERBOLT M8 X 30MM FJEDERSKIVE Ø8 SKIVE Ø8 X 17 X 3MM SKIVE Ø8 X 17 X 3MM LIGE CONNECTOR FOR BREMSESLANGE SINTERED BREMSEKLODS, 1 STK

Homologation til SA2 kan findes her
  
   

Rear brake calipers sa2/bs6/bsd complete

Rear brake calipers sa2/bs6/bsd complete
Complete SA2 - BS6 brake caliper. 
It comes complete with brake pads.

Original OTK part
 
280,00EUR

Brake pads SA2 - BS5 - BS6, single

Brake pads SA2 - BS5 - BS6, single
Brake pad SA2 - BS5 - BS6 for Racer - Mercury - Victory - Noesis before 2017.
The price is for 1 brake pad. But 2 for a kit. 

Original OTK part. 
 
19,00EUR

Brake pads SA2-BS5-BS6 2pcs box

Brake pads SA2-BS5-BS6 2pcs box
 
Brake pad SA2 - BS5 - BS6 for Racer - Mercury - Victory - Noesis before 2017.
The price is for 1 brake pad. But 2 for a kit. 

Original OTK part. 
 
37,00EUR

Sintered brake pad for self adjusting calipers, single

Sintered brake pad for self adjusting calipers, single
Sintered brake pad. The price is for one brake pad and you will have to order 2 to get a kit.

Original OTK part.

 
24,00EUR

Bolt allen M8 x 25mm

Bolt allen  M8 x 25mm
Bolt allen M8 x 25 mm.
The bolt is, among other things, used to put together the two pieces of the brake caliper SA2. 

Original OTK part. 
 
0,16EUR

Head Bolt M8 x 55mm

Head Bolt M8 x 55mm
Head bolt M8 x 55 mm. 
The bolt is used for the bracket on the axle support where it is tightened from the axle support into the bracket. You will have to ise a washer Ø8 x 17 x 3mm for this bolt. 

Original OTK part.
 
0,25EUR

Discharge screw Ø7 x 1mm

Discharge screw Ø7 x 1mm
Discharge plug for BSD and SA2 brake systems. 
In order to bleed the brake system you have to loosen the discharge plug. 
Remember to tighten with caution otherwise the screw might break. 
The discharge plug is Ø7. 

Original OTK part 
 
3,00EUR

SA2 - BSD - BS6 rear brake calipers piston

SA2 - BSD - BS6 rear brake calipers piston
Piston for brake caliper which is in BSD and SA2 brake system.
On the outside of the piston is the lining and after you have that you can mount it in the brake caliper.

Original OTK part.
 
8,00EUR

Magnet for BSS - SA2 - SA2 - BS5 - BS6 calipers piston

Magnet for BSS - SA2 - SA2 - BS5 - BS6 calipers piston
Magnet for BSD, SA2, BS5 and BS6 brake systems.
The magnet is mounted to the brake calipers piston with the countersunk M4 x 14 mm bolt.

Original OTK part
 
1,80EUR

Counter sunk screw M4 x 14mm

Counter sunk screw M4 x 14mm
Countersunk screw M4 x 14 which fits in the brake calipers magnet and after screwed into the piston of the brake caliper. 

Original OTK part.
 
0,07EUR

SA2 - BSD - BS6 rear brake calipers lining

SA2 - BSD - BS6 rear brake calipers lining
Rear brake calipers lining for BSD, SA2 and BS6.
The lining is mounted outside the piston and after that it can be mounted in the brake caliper.

Original OTK part
 
3,40EUR

Brake calipers clips for bs6/sa2/bsd

Brake calipers clips for bs6/sa2/bsd
Clips for the brake caliper for BSD, SA2 and BS6 brake systems. 
The clips is mounted in the caliper of every piston.

Original OTK part. 
 
1,00EUR

Complete pads pin BSD - SA2

Complete pads pin BSD - SA2
Complete Bolt for the brake pads for BSD and SA2
Including the locking bush, lock screw and nut.

Original OTK part.
1,90 1,71EUR

Pads pin for BSD - BSM - SA2 rear brake caliper

Pads pin for BSD - BSM - SA2 rear brake caliper
Bolt for the brake pads for BSD, SA2, BSM 4 and BSM brake systems.
Remember the locking bush, lock screw and nut.

Original OTK part.
 
0,75EUR

Spring washer Ø8

Spring washer Ø8
Spring washer Ø8 mm.
These are used for the side boxes, where it will be a standard on buttonhead M8 x 16 mm.

Original OTK part
 
0,06EUR

Self locking nut, M5

Self locking nut, M5
This self locking nut is without nylon lock and is very usable where there will be high temperatures as the brake disk. 

Original OTK part. 
 
0,06EUR

Locking bush for SA2 - BSD - BS6 rear brake calipers pad

Locking bush for SA2 - BSD - BS6 rear brake calipers pad
This lock bush is used for the rear brake calipers BSD - SA2 and BS6.
The lock bush is mounted around the bolt for the brake pads and it's a safety for the brake pads. 
Remember the lock screw M4 x 4 mm. 

Original OTK part
 
1,00EUR

Lock, flat tip, M4 x 4mm

Lock, flat tip, M4 x 4mm
Lock screw M4 x 4 with flat head which is screwed in the lock bush which is mounted on the outside of the bolt for the brake pads.

Original OTK part. 

 
0,09EUR

Washer Ø8 x 17 x 3mm

Washer Ø8 x 17 x 3mm
Washer in size:
Inner diameter: Ø8
Outer diameter: 17mm 
Width: 3mm

This is used amongst others, the axle support. 

Original OTK part
0,10EUR

Head Bolt M8 x 40mm

Head Bolt M8 x 40mm
Head bolt M8 x 40mm. 
The bolt is often used to mount the axle support on the kart and for OTK silencer cradle.

Original OTK part 
 
0,17EUR

Calipers support, Ø180 mm

Calipers support, Ø180 mm
Support for OTK rear brake disk Ø180 mm. 

Original OTK part
 
55,00EUR

SA2 CALIPERS EXTENSION DISK, Ø180 to Ø206 mm

SA2 CALIPERS EXTENSION DISK, Ø180 to Ø206 mm
Extension bracket which will move the caliper 5 mm. 

Original OTK part.
 
22,50EUR

Bolt allen M8 x 30mm

Bolt allen M8 x 30mm
Bolt allen M8 x 30 mm.
Used, among other things, for the exhaust manifold on Vortex KZ, to tighten the rear brake hub on Ø30 mm Rookie, tighten the Ø30 rear wheel hub and tighten the SA2 rear brake caliper system together.

Original OTK part
 
0,17EUR

Calipers connection for eccentric axle support 5 mm Ø180 mm (Moves caliper 5 mm)

Calipers connection for eccentric axle support  5 mm Ø180 mm (Moves caliper 5 mm)
Calipers connection for eccentric axle support  5 mm Ø180 mm (Moves caliper 5 mm)

Original OTK part
 
55,00EUR

Calipers connection for eccentric axle support 10 mm Ø180 (Moves caliper 10 mm)

Calipers connection for eccentric axle support 10 mm Ø180 (Moves caliper 10 mm)
Calipers connection for eccentric axle support 10 mm Ø180 (Moves caliper 10 mm)

Original OTK part
 
55,00EUR

Brakes air conveyor, OTK

Brakes air conveyor, OTK
Air conveyor for brakes and used for cooling the brake. 
Can be mounted on the left side of the kart so the rear end of the pipe will point on the brake caliper and disk.

Original OTK part
 
20,00EUR

Screws for brakes air conveyor

Screws for brakes air conveyor
Complete kit for mounting the air conveyor. 

Original OTK part 
 
7,50EUR

Bolt allen M8 x 35mm

Bolt allen M8 x 35mm
Bolt allen M8 x 35 mm. 
Used for attaching the engine mount to the engine mount bracket on the frame, tighten the Ø30 brake disk hub and to tighten the Ø30 rear wheel hub.

Original OTK part
0,19EUR
  
   

The kartstore has over 3300 kart parts and wheels parts in stock.

Official OTK dealer. Kartshop provide the best kartstore. Great prices, quality and wheels parts

Kartshop, kartstore, kart store, kart parts, OTK. Engines and spare parts and wheels parts in stock

Tillet, Jecko, exprit, kart tyres, New line, M7, engines, spare parts and wheels parts in stock.