Frontpage
Sale
News
Customer Center
Dealer login
Rate us on Trustpilot
Facebook
Instagram

Worldwide shipping Day to day delivery Everything in stock Excellent customer service +5500 kart parts available

Your purchase00,00 EUR

Basket total excl. shipping0,00 EUR

Trustpilot

Products

Karts
Engine
Engine Parts
OTK Parts
Kart parts
Clothing
Oil / Spray
Universal parts
Tires

Crankshaft housing

Engine » Vortex DJT/DST » Crankshaft housing

Oil Air Vent cap, One Engines

It can be mounted on any engine using a simple flexible fuel pipe.

5,23EUR

Oil seal, Ø20x35-7 mm, ARS FPJ Teflon

Oil seal for crankshaft

Outer diameter: 35 mm

Inner diameter: 20 mm

Width: 7 mm

ARS FPJ Teflon

Top-quality.

Produced in Japan

3,70EUR

Bearing SKF 6202-2RSL - 15 x 35 x 11

Quality bearing from SKF model 6202-2RSL which is used in the crankshaft on Vortex DJT and DST engines.
Outer diameter : 35 mm
Inner diameter : 15 mm
Width: 11 mm.

The bearing is equipped with two gaskets of synthetical rubber which prevents leakage of lubricant and intrusion of dust, water, and other damaging materials.
Well used for high speeds

Original Vortex spare part.

5,18EUR

Carbon flow deviat 9/12

Strengthener for reed petal 9/12 which is mounted outside the reed petal on the reed pyramid.

27,76EUR

Carbon Reed Petal, One Engines, DJT/DST/DDJ/DDS/DVS

Reed petal kit which can be used on Vortex Engines.
Developed and used by One Engines.
Fits on a list of models found in the bottom desciption.

66,67EUR

Cylinder Studbolt M8 x 55, Vortex

2,48EUR

Cylindrical pin 6x12 mm

Cylindrical pin 6 x 12 mm.
Used on the top of the crankshaft housing on Vortex where the cylinder is mounted.

0,75EUR

Dowel 10x10x6,5

Dowel that is used for crankshaft housing and gear cover on Vortex engines.

3,13EUR

Engine head nut copper M8, Vortex

Engine head copper nut for the Vortex engines. The copper nuts are used for tightening the engine head to the cylinder. You will need 6 copper nuts to change all of the copper nuts on the engine. Full detail further down.

0,19EUR

Gasket for Crankcase, Vortex DDJ - DDS

Gasket for the crankcase on DDJ and DDS engines from Vortex for OKJ and OK.

4,80EUR

Gasket for Crankcase, Vortex DJT - DST

Gasket for the crankcase on DJT and DST engines from Vortex for OKJ and OK.

4,80EUR

Insert SKF, A.m.bc1-1442b

Insert SKF, A.m.bc1-1442b, DJT / DST / KZ which fits Vortex engines and TM for OKJ / OK and KZ.

60,20EUR

Oil drain plug M8x1

Plug for oil drain with copper washer.
Fits Vortex DJT and DST.

1,19EUR

O-ring for Water connection, 17,17 x 1,78 mm, Vortex DJT - DST

O-ring for water connection for Vortex DJT and DST.
There are 2 O-rings on the water connection which should be changed if you take the connection out.
Diameter : 17,17 mm
Tykkelse : 1,78 mm.

0,54EUR